BenS
06-30-2008, 10:15 PM
a few weeks back I took the cobra to a local shop to have a new clutch put in. I also had him do a billet quadrant and adjuster.
Since then, a fuse has been blowing at random times. It is the brake lights / hazard lights / turn signals / cruise.
Tonight I was installing a set of Bullitt pedals and while on the clutch pedal, I heard the fuse go. I'm wondering if the switch is bad, and how the crap you get the thing out of there. I didn't see any bolts or anything, but it is real loose and wobbly.
There's a couple of connectors that plug up to the switch. I started to unplug them and see how that goes, but then decided against it.
Since then, a fuse has been blowing at random times. It is the brake lights / hazard lights / turn signals / cruise.
Tonight I was installing a set of Bullitt pedals and while on the clutch pedal, I heard the fuse go. I'm wondering if the switch is bad, and how the crap you get the thing out of there. I didn't see any bolts or anything, but it is real loose and wobbly.
There's a couple of connectors that plug up to the switch. I started to unplug them and see how that goes, but then decided against it.