Rear end noise

[SleeperGT]

~month ago installed new diff. Stock 31 spline Ford diff. Recently a noise occurs when I turn...its a little louder when I turn left...most noticable at lower speeds turning into something like a driveway. It sounds like a large dog whaling...I know thats a weird comparison...only thing I can think of.

I am diagnosis stupid...my thought is that it is in the spider gears or the diff clutches?

Again...only makes the noise when there is a difference in speed of the wheels.

Thoughts?

[Twiceblown351]

The ring and pinion is set wrong.

[SleeperGT]

Set wrong how? It has a back lash of .012 (ford spec say .008-.014 are acceptable) the contact patch of the pinion to ring was down the middle like this http://www.tennesspeed.net/gallery/showphoto.php?photo=8681&ppuser=2003 (http://www.tennesspeed.net/forums/../gallery/showphoto.php?photo=8681&ppuser=2003)


Also...and again I am learning this is not a smart ass question...if the ring and pinion were set wrong...wouldn't it whine constantly? Why would it only do it while I was turning?http://www.tennesspeed.net/gallery/showphoto.php?photo=8681&ppuser=2003http://www.tennesspeed.net/gallery/showphoto.php?photo=8681&ppuser=2003

[qwkvert]

my dakota does this when turning only, limited slip dif, and it is annoying as all get out, but it never one wheel peels....

[Disney Lincoln]

It sounds like you just need to put some Ford Friction Modified in the pumpkin.

R&P being set wrong will whine while driving straight. It's just the clutches.